Bronkhorst E-8000 - Manual (Page 24)

Bronkhorst High-Tech B.V.
E-8000 9.17.076 24
3.2.13 Set setpoint at counter limit
You can program an automatic setpoint which will be
activated when the counter limit is reached.
To change this setpoint use the button to select the
setpoint change option and press to enter the counter
setpoint settings screen.
When entering the counter setpoint settings screen the
setpoint change parameter is selected. Press
to enter the
edit mode.
In the edit mode, use and to select 'yes' or 'no'. Press
to exit the edit mode without changes. Press to
confirm your selection and to exit the edit mode.
In the counter setpoint settings screen press to select the
setpoint parameter. Press to enter the edit mode.