Bronkhorst E-8000 - Manual (Page 16)

Bronkhorst High-Tech B.V.
E-8000 9.17.076 16
3.1.10 Custom readout 2
The ‘Custom readout 2’ area is always visible. The operator
can choose one of following parameters to be shown:
parameter editable
counter yes
setpoint yes
actual or percentage reading no
actuator no
alarm yes
capacity no
temperature no
density no
instrument yes
The available parameters of this area are
determined by the connected instrument.
From the ‘Measure readout’ press to change the readout
parameter of ‘Custom readout 2’. Press again to select the
next available parameter.
3.1.11 Measure readout
The 'Measure readout' area shows the actual measured value.
The following parameters will affect the format of this
readout:
actual or percentage readout
number of digits
3.2 Settings menu
From the readout screen press to enter the settings menu.
Use the button to return to the measure readout screen.
Security settings can be set to avoid unauthorised
access to this menu.
For changing security settings see section 3.4
'Security settings'.
The available menu options are determined by the
instrument you are operating.
In the following explanation, all possible options are shown.