Bronkhorst E-8000 - Manual (Page 14)

Bronkhorst High-Tech B.V.
E-8000 9.17.076 14
3.1.6 Reset Counter
Check section 3.1.10 'Custom readout 2' how to change the
shown parameter.
To reset the counter press 2x
in the selected readout area
in which this parameter is displayed. Press to enter the
edit mode.
Press or to select ‘yes’ and press to confirm. The
counter will be reset to 0.
The
button can be used to exit the edit mode and cancel
the changes.
3.1.7 Edit Setpoint
Setpoint can only be edited when the setpoint parameter is
displayed in 'Custom readout 1' or 'Custom readout 2'.
To edit the setpoint press to select the readout area in
which this parameter is displayed. Press to enter the edit
mode, the first digit will lighten.
Security settings can be set to avoid unauthorised
access to the setpoint parameter.
For changing security settings see section 3.4
'Security Settings'.