Devicewiredsettings structure, Devicewirelesssettings structure, Devicewiredsettings – BrightSign Network Web API Reference Manual v.3.8 User Manual
Page 125: Devicewirelesssettings
113
•
[int] WiredConnection Priority: A number that defines the priority of a wired connection for the device.
•
[int] WirelessConnectionPriority: A number that defines the priority of a wireless connection for the
device
DeviceWiredSettings Structure
The DeviceWiredSettings structure has the following values:
•
[bool] UseDHCP: A flag specifying whether the device should use DHCP to obtain settings for the wired
connection.
Note: If the [bool] UseDHCP property is set to False, then the following properties should be defined.
•
[string] IpAddress: A user-defined IPv4 address for the device wired connection.
•
[string] SubnetMask: A user-defined IPv4 subnetwork mask for the device wired connection.
•
[string] DefaultGateway: A user-defined IPv4 default gateway address for the device wired connection.
•
[string] DNS1: A user-defined IPv4 address of a preferred DNS server for the device wired connection.
•
[string] DNS2: A user-defined IPv4 address of an alternate DNS server for the device wired connection.
•
[string] DNS3: A user-defined IPv4 address of a second alternate DNS server for the device wired connection.
DeviceWirelessSettings Structure
The DeviceWirelessSettings structure has the following values:
•
[bool] Enabled: A flag specifying whether the wireless module should be enabled or disabled.
•
[string] SSID: The service set identifier of the wireless network to which the device should connect.
•
[string] Passphrase: The security key for the specified wireless network. For security reasons, this property
will always return Null (even if it has a value) when called by the following device management web methods:
GetAllDevices, GetSpecifiedDevices, FindDevices, GetDevice, GetDeviceBySerial.
•
[bool] UseDHCP: A flag specifying whether the device should use DHCP to obtain settings for the wireless
connection.
Note: If the [bool] UseDHCP property is set to False, then the following properties should be defined.
•
[string] IpAddress: A user-defined IPv4 address for the device wireless connection.