Bematech MP-4000 TH Programmer's Manual - Manual (Page 58)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 58
GS F9h 1Fh 31h
[Function] Return to previous set of commands configured before temporary
setting.
[Format] ASCII GS F9h 1Fh 31h
Hexadecimal 1D F9 1F 31
Decimal 29 249 31 49
[Description] Tells printer to interpret the command set that was configured before
an temporary set has been done.
ESC = n
[Function] Select peripheral device.
[Format] ASCII ESC =
n
Hexadecimal 1B 40 n
Decimal 27 64
n
[Description] Enable/disable printer based on n value as follow:
9 When bit 0 from n is 0, printer is disabled
9 When bit 0 from n is 1, printer is enabled
9 All other bits (1 to 7) are ignored
[Default]
n
= 1
ESC @
[Function] Initializes the MP-4000 TH printer.
[Format] ASCII ESC @
Hexadecimal 1B 40
Decimal 27 64
[Description] All settings, including character font, line spacing, left margin, right
margin, intensity and inverted mode are canceled.