Bematech MP-4000 TH Programmer's Manual - Manual (Page 29)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 29
ESC S n
[Function] Enable superscript and / or subscript
[Format] ASCII ESC S
n
Hexadecimal 1B 53 n
Decimal 27 83 n
[Range] n = 0, 1
[Description] Enables superscript character and or subscript.
9 When n is 0 (00h or 30h), the superscript is enabled. The
following characters are printed on the upper side of the print
line.
9 When n is 1 (01h or 31h), the subscript is enabled. The
following characters are printed on the bottom side of the print
line.
ESC T
[Function] Disable superscript and subscript modes
[Format] ASCII ESC T
Hexadecimal 1B 54
Decimal 27 84
[Description] Disables both superscript and subscript print modes.
ESC N n
[Function] Select Intensity Mode
[Format] ASCII ESC N n
Hexadecimal 1B 4E n
Decimal 27 78
n
[Range] n = 0, 1, 2, 3, 4
[Default] n = 2
[Description] Selects intensity mode.
9 When n is 0 (30h), the intensity selected is VERY WEAK.
9 When n is 1 (31h), the intensity selected is WEAK.