Bematech MP-4000 TH Programmer's Manual - Manual (Page 30)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 30
9 When n is 2 (32h), the intensity selected is NORMAL.
9 When n is 3 (33h), the intensity selected is STRONG.
9 When n is 4 (34h), the intensity selected is VERY STRONG.
ESC ! n
[Function] Select print mode
[Format] ASCII ESC !
n
Hexadecimal 1B 21 n
Decimal 27 33
n
[Description] Selects the print mode depending on byte n as shown in the table
below:
Value
Bit Function
0 1
0 Undefined
1 Undefined
2 Undefined
3 Emphasized Canceled Specified
4 Double height Canceled Specified
5 Double width Canceled Specified
6 Undefined
7 Underlined Canceled Specified
ESC } n
[Function] Enable / Disable Inverted mode
[Format] ASCII ESC } n
Hexadecimal 1B 7D n
Decimal 27 125
n
[Range] n = 0, 1
[Default] n = 0
[Description]
Enables or disables inverted mode.
9 When n is 1 (01h or 31h), the inverted mode is enabled.
9 When n is 0 (00h or 30h), the inverted mode is disabled.