Bematech MP-4000 TH Programmer's Manual - Manual (Page 47)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 47
3.9 Barcodes
GS h n
[Function] Sets the height n of the barcode generated
[Format] ASCII GS h n
Hexadecimal 1D 68 n
Decimal 29 104 n
[Description] Each height unit corresponds to a dot of 0.125 mm, so the final height
is n x 0.125 mm where 1 ≤ n ≤ 255. The default is n=162.
GS w n
[Function] Determines the width of the barcode
[Format] ASCII GS w n
Hexadecimal 1D 77 n
Decimal 29 119
n
[Description] This command changes the barcode width where n=2 correspond to
normal width, n=3 is double width and n=4 is quadruple width. The
default is n=3.
GS H n
[Function] Choose the position of the human readable information (HRI) of the
barcode
[Format] ASCII GS H
n
Hexadecimal 1D 48 n
Decimal 29 72
n
[Description] n= 0: No HRI
n= 1: On top of the barcode (default)
n= 2: On the bottom of the barcode
n=
3: Both on top and on the bottom of the barcode