Bematech MP-4000 TH Programmer's Manual - Manual (Page 16)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 16
ESC w
[Function]
Performs a full paper cut.
[Format]
ASCII ESC w
Hexadecimal 1B 77
Decimal 27 119
[Description]
This command operates the auto cutter, performing a full cut in the
paper.
[Notes]
When presenter is activated there is a minimum receipt size (roughly 3.3
inches) to avoid paper jam inside the presenter. If the receipt size is less
than the minimum, the full cut command will automatically add line feeds
to perform the cut.
ESC m
[Function]
Performs a partial paper cut.
[Format]
ASCII ESC m
Hexadecimal 1B 6D
Decimal 27 109
[Description]
This command operates the auto cutter, performing a partial cut in the
paper.
[Notes]
This command is available only if presenter is not activated.
ESC y n
[Function]
Enable / disable panel keys.
[Format]
ASCII ESC y n
Hexadecimal 1B 79 n
Decimal 27 121 n
[Range] n
= 0,1
[Default] n = 1
[Description]
Enables or disables the panel key.
9
When n is 0 (00h or 30h), the panel key is disabled.
9 When n is 1 (01h or 31h), the panel key is enabled.
9
[Notes] When the panel key is disabled, no button on the panel is usable.