Bematech MP-4000 TH Programmer's Manual - Manual (Page 34)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 34
SI
[Function] Set condensed mode
[Format] ASCII SI
Hexadecimal 0F
Decimal 15
[Description] This command set the ESC SI cpl. All characters type can be set in
this mode. See table 1 to know the number of cpl, according to your
printer model. It is a copy of ESC SI command.
SO
[Function] Set on-line expanded mode
[Format] ASCII SO
Hexadecimal 0E
Decimal 14
[Description] If this command is received in the beginning of the line, expanded is
valid for all line. If already exist some characters in the line, next
characters in this line (if any) will be in expanded mode. Next lines will
be in normal mode. It is a copy of ESC SO command.