Bematech MP-4000 TH Programmer's Manual - Manual (Page 26)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 26
ESC a n
[Function] Aligning the characters
[Format] ASCII ESC a
n
Hexadecimal 1B 61 n
Decimal 27 97 n
[Range] n = 0, 1
[Default]
n
= 0
[Description] This command sets the horizontal justification.
9 When n is 0 (00h or 30h), align is left justified.
9 When n is 1 (01h or 31h), align is center justified.
[Notes] The power on default is left justified.