Bematech MP-4000 TH Programmer's Manual - Manual (Page 31)

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5 31
3.5 Print width, character width and height
DC2
[Function] Disable condensed mode
[Format] ASCII DC2
Hexadecimal 12
Decimal 18
[Description] Disables the condensed mod set by the ESC SI or SI command.
DC4
[Function] Disable on-line expanded print
[Format] ASCII DC4
Hexadecimal 14
Decimal 20
[Description] Disables the on-line expanded print set by ESC SO or SO command.
ESC d n
[Function] Enable / Disable double height print mode
[Format] ASCII ESC d
n
Hexadecimal 1b 64 n
Decimal 27 100
n
[Range] n = 0, 1
[Default] n = 0
[Description] Enables or disables double height print mode.
9 When n is 1 (01h or 31h), the double height is enabled.
9 When n is 0 (00h or 30h), the double height is disabled.