Belshaw Adamatic TG25 Thermoglaze - Manual (Page 25)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Thermoglaze 25 TS MN-1728EN 1
1 Unloading and Uncrating
DO NOT LIFT EXCESSIVE
WEIGHT
Once the crate has been delivered,
immediately take the covers off the crate and
inspect for hidden damage. If damage is
found, please see the above information to
make a damage claim to the shipping
company. After inspection, cut the banding
and remove any other restraints from the
Thermoglaze unit. Remove the banding and
other packing material from the Thermolizer
unit. Roll the Thermolizer, carefully, off the
skid first and move it near the area where it
will be assembled.
Do not connect the Thermoglaze or the
Thermolizer to electrical power before
completing the assembly and placement of
the products.
The cartons under the Thermoglaze contain the
glaze trough and oven guard. See Section 3 to
assemble the unit. The carton in the Thermolizer
contains the doors and other interior parts. See
Thermolizer manual for assembly instructions.
The Thermoglaze system has been designed for
quick assembly and installation. Within a few
minutes of receiving the system, the installer can
have the Thermoglaze ready to make donuts if
the electrical connections are properly installed
and inspected by the prevailing local authorities.