Belshaw Adamatic TG25 Thermoglaze User Manual
Page 14
Belshaw Bros., Inc.
• www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
8
MN-1727EN
Thermoglaze 25 OM
Assembly:
1. Install the crumb tray.
2. Install the conveyor into the oven and line
up the locating pins at the outfeed end of
the oven.
Note: lubricate the pump shaft “O” ring and
gear impellers with food grade mineral oil
before installation.
CAUTION
Failure to properly clean or lubricate the glaze
pump could cause damage to the pump gear
impellers.
3. Install the glaze pump body.
4. Install the drive gear onto the splined
shaft.
5. Install the lay gear onto the smooth shaft.