Belshaw Adamatic TG25 Thermoglaze - Manual (Page 15)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Thermoglaze 25 OM MN-1727EN 9
6. Install the glaze pump cover “O” ring into
the cover and install the cover onto the
pump. Make sure the “O” ring stays in
the groove during installation.
7. Install the wing nuts onto the pump, do
not over tighten them.
8. Install a hose gasket on the top of the
pump.
9. Install the glaze kettle; make sure the
gasket is properly seated.
10. Install the hose clamp. Finger tighten
only, do not use tools.
11. Install the glaze hose, gasket and clamp.
Finger tighten clamp only.