Belshaw Adamatic Mark VI Donut Robot - Manual (Page 47)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Donut Robot Mark VI TS MN-1033EN 11
2 Maintenance
WARNING
To avoid being burned, electrocuted, or
otherwise injured, always unplug the
machine and allow it to cool before
performing any maintenance.
Lubricating
Daily
Before using the machine each day, apply edible-
grade mineral oil to the plunger connecting rod.
The oil should penetrate the ball lock and the
spring socket. See Figure 2-1.
Figure 2-1. Lubricating the Connecting Rod
Assembly.
Weekly
* Apply a few drops of SAE 30-weight
machine oil to the swing column where
it contacts the swing column bracket.
* Remove the heater head cover and lightly
coat the gear teeth with multi-purpose
grease. Replace the cover. See Figure
2-2.
Figure 2-2. Lubricating the Drive Gears.