Belshaw Adamatic Mark VI Donut Robot - Manual (Page 33)

If you accept the machine from the shipping
company, you are, in effect, saying that the
machine is in good condition, and you must
pay for the machine. Belshaw cannot pay for
shipping damage, because the freight company
has accepted the machine from Belshaw in good
condition, and is responsible for its safe delivery.
For your protection, inspect the machine to see
that no parts are bent, scratched, or otherwise
damaged. If any damage has occurred in
shipping, file a freight claim with the shipping
company immediately.
IMPORTANT
Keep this manual for reference purposes.
To unpack the Donut Robot
®
Mark VI and
transport it to the work station:
1. Remove the foam and other packing
materials from the two boxes.
2. Carry the hopper, plunger, and column to the
work station.
3. Coil the cutter head power cord and carry
the cutter head to the work station.
4. Carry the conveyor assembly to the work
station.
4. Remove the clevis pins that hold the heater
head in place, and lift the heater head out of
the fryer.
5. Coil the power cord and carry the heater
head to the work station.
6. Move the fryer case and kettle to the work
station.
EQUIPMENT RECORD
Please provide the information below when you correspond with us about your machine.
Purchased by _____________________________________________________________________
Installed by ______________________________________________________________________
Date of Installation ________________________________________________________________
Model number ___________________________________________________________________
Serial number
011108
MN-1033EN
Belshaw Bros., Inc.
814 44 th Street NW, Suite 103
Auburn, WA 98001 USA
Phone: + -1-206-322-5474 • Fax: + -1-206-322-5425
E-mail: [email protected] • http://www.belshaw.com