Belshaw Adamatic Mark VI Donut Robot - Manual (Page 40)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
4 MN-1033EN Donut Robot Mark VI TS
Read steps 7 and 8 only if you are preparing to
make cake donuts.
7. Insert the swing column into the swing
column mounting bracket. Make sure the
plastic spacer washer is on the swing column
between the lower set collar and the swing
column mounting bracket. See Figure 1-5.
Figure 1-5. Inserting the Swing Column.
8. Connect the swing connecting rod to the
throw arm of the swing column. A locating
pin on the swing connecting rod rests in a
hole in the throw arm. See Figure 1-6.
Figure 1-6. Connecting the Swing
Connecting Rod.
9. Be sure your power source matches the
specifications on the data plate. Connect the
machine to the power source.
10. Turn on the conveyor only and check to see
that it operates smoothly. The power switch
for the conveyor drive is on the heater head.