Belshaw Adamatic Mark VI Donut Robot - Manual (Page 45)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Donut Robot Mark VI TS MN-1033EN 9
FT2-DW Feed Table
SPECIFICATIONS
Dimensions Shipping
Weight
Electrical Data Construction Standard
Equipment
L = 49”/124.5
cm
W = 19-
1/8”/48.6 cm
H = 11”/28 cm
55 lb./
24.8 kg
115 V
1 Phase
50 Hz
Stainless steel,
nickel-plated mild
steel, and aluminum
alloys. Complete conveyor
assembly, including
drive system and
controls. Does not
include proofing
cloths or proofing
boards.
Figure 1-12. FT2-DW Feed Table.
The FT2-DW Feed Table is designed to supply
proofed yeast-raised donuts to the Mark VI.
The Feed Table produces less than 70 dB(A) of
equivalent continuous A-weighted sound
pressure at work stations. This has been
determined while the machine has been running,
using a Bruel & Kjaer Sound level meter, type
2236.
The Feed Table is meant to be used on a flat,
stationary table or countertop, positioned end-to-
end with the Donut Robot. The operator is
expected to read and follow these instructions
and warnings.