BECKHOFF C1300 User Manual
Page 44
C1300 VME to II/O Interface Unit
Beckhoff II/O-System
Page 44 of 44
Version : 2.01
Date : 18.12.95
5.3. Installation on the VME Card Cage
1.
Switch off the VME system and external power supply.
2.
The module is installed in a slot of the VME Card Cage
A VME system run will also start the C1300. But before running the C1300, all fiber optic
connections have to be established and the C1300 must be configurated correctly.
See also other documents in the category BECKHOFF Hardware:
- CB1052 (86 pages)
- CB1061 (124 pages)
- CB2051 (77 pages)
- CB3052 (78 pages)
- CB3053 (69 pages)
- CB3056 (86 pages)
- CB3060 (113 pages)
- CB3063 (93 pages)
- CB4053 (69 pages)
- CB4053 (75 pages)
- CB4051 (70 pages)
- CB4052 (73 pages)
- CB4055 (85 pages)
- CB4058 (78 pages)
- CB4060 (114 pages)
- CB4063 (87 pages)
- Onboard SATA RAID (25 pages)
- C1120 (52 pages)
- C1220 (30 pages)
- M1110 (17 pages)
- M1400 (16 pages)
- M1410 (14 pages)
- M1600 (14 pages)
- M2400 (15 pages)
- M2510 (11 pages)
- M3120 (14 pages)
- M6330 (5 pages)
- M9110 (2 pages)
- PT100 (10 pages)
- II/O-Lightbus (9 pages)
- FC7502 (18 pages)
- CX1500-x520 (51 pages)
- FC5102 (95 pages)
- FC9062-0000 (43 pages)
- CU2608 (22 pages)
- FM33xx (39 pages)