BECKHOFF C1300 User Manual
Page 27
C1300 VME to II/O Interface Unit
Beckhoff II/O-System
Date : 18.12.95
Version : 2.01
Page 27 of 44
3.4. Configuration
There are four functions to describe the configuration, assignments of the input and output
lines of the II/O System for the addresses in the DPRAM, and assignment of modules to the
process groups.For the transmission of configurations handshake channels are used as well. At
the beginning of every new configuration the managing part of communications is to be
reinitialized.
Communications can either be configured as CDL communications or as free programmable
communications.
See also other documents in the category BECKHOFF Hardware:
- CB1052 (86 pages)
- CB1061 (124 pages)
- CB2051 (77 pages)
- CB3052 (78 pages)
- CB3053 (69 pages)
- CB3056 (86 pages)
- CB3060 (113 pages)
- CB3063 (93 pages)
- CB4053 (69 pages)
- CB4053 (75 pages)
- CB4051 (70 pages)
- CB4052 (73 pages)
- CB4055 (85 pages)
- CB4058 (78 pages)
- CB4060 (114 pages)
- CB4063 (87 pages)
- Onboard SATA RAID (25 pages)
- C1120 (52 pages)
- C1220 (30 pages)
- M1110 (17 pages)
- M1400 (16 pages)
- M1410 (14 pages)
- M1600 (14 pages)
- M2400 (15 pages)
- M2510 (11 pages)
- M3120 (14 pages)
- M6330 (5 pages)
- M9110 (2 pages)
- PT100 (10 pages)
- II/O-Lightbus (9 pages)
- FC7502 (18 pages)
- CX1500-x520 (51 pages)
- FC5102 (95 pages)
- FC9062-0000 (43 pages)
- CU2608 (22 pages)
- FM33xx (39 pages)