BECKHOFF C1300 - Manual (Page 24)

C1300 VME to II/O Interface Unit Beckhoff II/O-System
Page 24 of 44 Version : 2.01 Date : 18.12.95
Funktion 09h : Software-RESET
This Function is used to to reset the C1300. Apart from reinitializing fo-ring the
controller and the dual port RAM are reinitilized too.The finished reset is quitted,
transmitting the codeword without a data valid.
The software reset is only executed, after the data quit bits in handshake channel 1
and the data valid in handshake 2 were removed.
channel length function argument
0
argument
1
argument
2
comment
call 02 09
response 04 02 fe af