BECKHOFF AL2000 Linear servomotor - Manual (Page 20)

Technical description
Attribute AL20xx AL24xx AL28xx
Screws for magnetic plates (s­
tainless) M5x10, DIN7984 M5x10, DIN7984 M5x16, EN ISO 4762
Screws for coil unit (steel);
Length depends on the thick­
ness of the carriage
M5, EN ISO 4762 M4, EN ISO 4762 M5, EN ISO 4762
Locating pins (stainless) 5h8
6.4.2 Servo drive and feedback system
The following components are required for the construction of a complete linear axis and its operation:
• Servo drive, e.g.: AX5xxx from Beckhoff Automation GmbH.
• Graduated rule and linear displacement transducer or the MES feedback system without graduated
rule
• Cables and plugs
• Guides
• Mechanical support / machine bed
Linear servomotor AL2xxx 20 Version 4.0