Basler Electric BE1-25A - Manual (Page 18)

SPECIFICATIONS OF OPTIONS
To eliminate repetition, only the specifications that uniquely apply to a particular option are given below.
Specifications that are applicable throughout the unit (including the options) are stated above.
Voltage Acceptance Option A1
VOLTAGE DIFFERENCE CONTROL Minimum threshold adjustable from 0.5 to 5% of
generator voltage. (Generator voltage minus bus
voltage)
Weight 6.6 oz (186.0 g)
Voltage Acceptance Option A2
BUS VOLTAGE UPPER LIMIT CONTROL Maximum threshold adjustable from 100 to 150 Vac.
BUS VOLTAGE LOWER LIMIT CONTROL Minimum threshold adjustable from 80 to 120 Vac.
VOLTAGE DIFFERENCE CONTROL Minimum threshold adjustable from 1 to 10 Vac of
generator voltage. (Generator voltage minus bus
voltage)
Weight 8 oz (226.8 kg)
Frequency Matching Option F5
CORRECTION PULSE WIDTH CONTROL Adjustable from 0 to 99.9 seconds.
CORRECTION PULSE INTERVAL CONTROL Adjustable from 0 to 99.9 seconds.
Weight 6.6 oz (186.0 g)
Voltage Matching Option V1
Weight 5 oz (140.6)
Voltage Matching Option V2
CORRECTION PULSE WIDTH CONTROL Adjustable from 0.1 to 5.0 seconds.
CORRECTION PULSE INTERVAL CONTROL Adjustable from 0.2 to 10.0 seconds.
Weight 7.0 oz (200.0 g)
Voltage Matching Option V3
CORRECTION PULSE WIDTH CONTROL Adjustable from 0.1 to 5.0 seconds.
CORRECTION PULSE INTERVAL CONTROL Adjustable from 0.2 to 10.0 seconds.
Weight 8.5 oz (240.4 g)
Dead Bus Option D1
VOLTS CONTROL Adjustable from 10.0 to 40.0 Vac.
Weight 6.6 oz (186.0 g)
1-8 BE1-25A General Information 9146600990 Rev S