Datalogic Scanning MAGELLAN 8500 - Manual (Page 361)

Product Reference Guide 6-255
MSI/Plessey Length Control
This feature specifies whether variable-length or fixed-length decoding
will be set for MSI/Plessey.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
MSI/PLESSEY LENGTH CONTROL = VARIABLE-LENGTH
MSI/PLESSEY LENGTH CONTROL = FIXED-LENGTH
NOTE
If variable-length control was selected, you must now set the features
MSI/Plessey Maximum Label Length and MSI/Plessey Mini-
mum Label Length. If fixed-length control was selected, you must
now set I 2 of 5 Fixed Length 1 and MSI/Plessey Fixed Length
2.