Datalogic Scanning MAGELLAN 8500 - Manual (Page 144)

6-38 Magellan ® 8500 Scanner
Scale Interface Type
Use this feature to select the scale interface type for RS-232 Standard and
RS-232 Wincor/Nixdorf POS interfaces. Choices are:
• No Scale Interface
• RS-232 — SASI
• RS-232 — ICL
To set the Scale Interface Type:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SCALE INTERFACE TYPE = NO SCALE INTERFACE
SCALE INTERFACE TYPE = RS-232 — SASI