Beep on ascii bel, Beep on not on file, Default – Datalogic Scanning I GD4100 User Manual

Page 64

Text mode
Original mode

RS-232/USB-Com Interfaces

Gryphon™ I GD4100

Beep On ASCII BEL

When this parameter is enabled, the reader issues a beep when a character is detected on
the RS-232 serial line. is issued to gain a user's attention to an illegal entry or other
important event.

ENTER/EXIT PROGRAMMING MODE

Beep On ASCII BEL = Disable

Beep On ASCII BEL = Enable

Beep On Not on File

This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.

ENTER/EXIT PROGRAMMING MODE

Beep On Not On File = Disable

Beep On Not On File = Enable

DEFAULT