Datalogic Scanning I GD4100 - Manual (Page 115)

Label ID
Product Reference Guide 113
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-
0xFF), used to identify a barcode (symbology) type. It can be appended previous to or following
the transmitted barcode data depending upon how this option is enabled. This feature provides
options for configuring custom Label IDs as a pre-loaded set (see "Label ID: Pre-loaded Sets"on
page
113 ) or individually per symbology (see "Label ID: Set Individually Per Symbology"on
page 115 ). If you wish to program the reader to always include an industry standard label
identifier for ALL symbology types, see the previous feature "Global AIM ID"on page 110 .
Label ID: Pre-loaded Sets
The reader supports two pre-loaded sets of Label IDs. Table 17 shows the default set and
alternate set.
CAUTION
ENTER/EXIT PROGRAMMING MODE
Label ID Pre-loaded Set = Return to Default Set
Label ID Pre-loaded Set = Alternate Set
Table 17. Label ID Pre-loaded Sets
When changing from one Label ID set to another, all other reader
configuration settings, including the host interface type, will be
erased and set to the standard factory defaults. Any customized
configuration will be lost.
DEFAULT
Symbology Default Label ID set Alternate Label ID set
ASCII
character
Hexidecimal
value
ASCII
character
Hexidecimal
value
CODABAR % 250000 R 520000
CODE11 CE 434500 b 620000
CODE128 # 230000 T 540000