Datalogic Scanning I GD4100 - Manual (Page 291)

Product Reference Guide 289
Appendix C
Standard Defaults
The most common configuration settings are listed in the “Default” column of the table below.
Page references are also provided for feature descriptions and programming barcodes for each
parameter. A column has also been provided for recording of your preferred default settings for
these same configurable features.
Table 37. Standard Defaults
Parameter Default Your Setting Page Number
General Features
Double Read Timeout 0.4 Second 23
Label Gone Timeout 160 ms 25
Sleep Mode Timeout Disable 27
Power On Alert 4 Beeps 29
Good Read: When to Indicate After Decode 30
Good Read Beep Type Mono 31
Good Read Beep Frequency Medium 32
Good Read Beep Length 80 ms 32
Good Read Beep Volume High 34
Good Read LED Duration
LED on until
next trigger pull
35
Scan Mode Trigger Single 37
Scanning Active Time 5 Seconds 42
Flash On Time 1 Second 44
Flash Off Time 600 ms 46
Green Spot Duration 300 ms 49
RS-232
Baud Rate 9600 52