Datalogic Scanning I GD4100 - Manual (Page 49)

Stand Mode Sensitivity
Product Reference Guide 47
Flash Off Time — cont.
Stand Mode Sensitivity
Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high.
ENTER/EXIT PROGRAMMING MODE
Select Flash OFF Time Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT 06 = Flash is OFF for 600ms
ENTER/EXIT PROGRAMMING MODE
Stand Mode Sensitivity = Low
Stand Mode Sensitivity = Medium
Stand Mode Sensitivity = High
DEFAULT