Avery Dennison Monarch 932 Stacker - Manual (Page 18)

3. Use the tab to lift the transport. Check for tags.
4. Remove the tags.
5. Lower the transport.
6. Replace the transport lock handle. Make sure it is completely in the
hole at the back of the stacker. Turn the handle down to lock.
7. Press Escape to clear the status code.
8. Continue printing.
I n s t a l l i n g R i s e r B l o c k s
Install riser blocks as shown when using a printer and stacker with a verifier.
Make sure the stacker feet fit securely in the riser blocks.
2-4 Using the Stacker
Front of stacker, hole side goes up Rear of stacker, slotted side goes up