Avery Dennison Monarch 932 Stacker - Manual (Page 12)

6. Place the tag weight against the tag stop.
7. Print a test batch of 50 tags. The stacker’s LED is on when tags are
moving through the stacker.
S t e p 6 - S e t t h e B e l t S p e e d .
1. Stack the tags in your hand.
2. Hold the stack against the tag gauge on the tag weight.
Note: If you are using pre-punched or chadless tags, hold the unpunched
part of the tag against the gauge.
The bar closest to the top of the stack is the number for the belt
adjustment.
1-8 Getting Started
Tag Stop