beautypg.com

Assembling the power stacker – Avery Dennison Stacker User Manual

Page 5

background image

User / Service Manual Power Stacker

10/06 Rev.

1.09

5

Assembling the Power Stacker

The power stacker is disassembled in the box when you receive it . Before you can use it you
have to assemble the platform !

Move the platform – the plastic part in front has to show to the printer side – on the two axles
coming out of the cover of the power stacker. Move it against the front plate. The axles will
show around 1 mm out of the platform.

Then clip the lock washer to the two axles (as shown on the pictures). The power stacker is
now ready for use with the TDI.

Attention: Please check if the security cover is mounted to the guiding axle (see picture)

of the media guiding.

axles