Paxar Monarch 9855 RFID Printer - Manual (Page 70)

1. Press l or r until you see
PARALLEL COMM
Port
r
2. Press Enter/Pause.
PORT
External
r
3. Use l or r to select either "External" or "Internal." Press
Enter/Pause. The internal port is used for printer options
installed inside the printer, such as the Ethernet
communication port. The external port is used to connect a
printer cable or external device directly to the parallel port.
4. Press Escape/Clear until you see the Main Menu.
M o d e
To change the setting, from the Main Menu select Setup, Port
Settings, then Parallel Comm. Then, follow these steps.
1. Press l or r until you see
PARALLEL COMM
l
Mode
2. Press Enter/Pause.
MODE
Compatible
r
3. Use l or r to select either "Compatible" or "IEEE1284."
Press Enter/Pause. Use compatible mode for a computer
connection to the printer with a parallel cable. Use
IEEE-1284 for bi-directional Ethernet communications. See
Appendix B, "Accessories and Options" for more information.
4. Press Escape/Clear until you see the Main Menu.
6-6 Setting Communications