Paxar Monarch 9855 RFID Printer - Manual (Page 34)

S p e e d
You can change the print speed for bar codes or graphics. If you
select "default" for speed, formats with serial bar codes
automatically print at 2.5 ips and formats with parallel bar codes
print at 6.0 ips.
The RFID printer pauses while programming
the RFID tag.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
l
Speed
r
2. Press Enter/Pause to set the speed option. The current
setting is displayed, for example:
SPEED
l
Default
3. Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main Menu.
For additional high speed printing information,
see Chapter 8, "Printing."
4-4 Setting Supply Options