Paxar Monarch 9855 RFID Printer - Manual (Page 46)

In the previous example, if the third label did NOT generate an
error,
◆ the batch image is printed
◆ the consecutive error counter is reset
◆ the printer continues processing the batch.
E r r o r A c t i o n M o d e s
Normal (default) The printer errors and the condition causing
the error is displayed. The error must be
cleared before operation can continue. An
operator must press Escape/Clear to clear the
error and continue printing. No overstrike
pattern is printed.
Overstrike/
Continue 1x to 5x The printer prints an overstrike pattern on
one, two, three, four, or five consecutive
labels and stops printing after the selected
number of overstrike patterns have been
printed. An operator must press
Escape/Clear to clear the error and continue
printing. The printer does not recalibrate
(feed a blank label) after any RFID error.
For more information about the error actions, see the following
table.
Error Action Standard Peel Verifier
with Peel
RFID with
Peel
Overstrike/
Continue 1-5 No No No
Normal (no
overstrike) Yes Yes Yes
If using any of the overstrike and continue
error action modes, do not use peel mode.
Do not use the label with the overstrike
pattern.
4-16 Setting Supply Options