Avery Dennison 9850 Addendum Version 3.0 - Manual (Page 8)

8
To enable or disable status polling and immediate commands while running in
Script mode:
1. From the Script Menu, press l or r until you see
SCRIPTS
l Status Polling r OR SCRIPTS
l Immed Command
2. Press Enter/Pause.
Enable Polling?
No r OR Enable Immed?
No r
3. Use l or r to select either “Yes” or “No” and press Enter/Pause. The default
is “No.”
E r r o r M e s s a g e s
You may receive the following errors when using a script.
Error Description/Action
850 Invalid script packet or not enough flash memory for the script. The
script download failed. Format flash memory and download the
script using the COPY command from DOS or the ADK2 software.
851 Invalid lookup table or not enough flash memory for the script. The
lookup table download failed. Check the data in the lookup table.
Format flash memory and download the script using the COPY
command from DOS or the ADK2 software.
852 Invalid buffer definition packet or not enough flash memory for the
script. One or more of the following buffers were invalid: input
buffer, temporary buffer, lookup buffer, printer, or array buffer.
Check the buffer definitions. Format flash memory and download
the script using the COPY command from DOS or the ADK2
software.
853 Invalid version string or not enough flash memory for the script. The
version information in the APPVERSION command is missing or
invalid. Make sure the information is enclosed in double quotation
marks. Format flash memory and download the script using the
COPY command from DOS or the ADK2 software.