Avery Dennison 9850 Addendum Version 3.0 - Manual (Page 7)

7
If status polling and immediate commands are NOT enabled through the I Packet,
enabling status polling and immediate commands at the printer’s front panel has
NO effect. For more information about the I Packet, refer to the Packet Reference
Manual, available on our Web site.
The following table shows the effects of the I Packet and the printer’s front panel
on status polling and immediate commands.
I Packet - Printer
configuration packet
(inside the script or sent
online to the printer) While Running in Script Mode ONLY
(set through printer’s front panel)
Disabled Enabled
Status
Polling OFF (status polling not
enabled by I packet) OFF (status polling
not enabled
through printer’s
front panel) OFF (status
polling enabled
through printer’s
front panel)
ON (status polling enabled
by I packet) OFF (status polling
not enabled
through printer’s
front panel) ON (status
polling enabled
through printer’s
front panel)
Immediate
Commands OFF (immediate
commands not enabled by
I packet) OFF (immediate
commands not
enabled through
printer’s front
panel) OFF (immediate
commands
enabled through
printer’s front
panel)
ON (immediate commands
enabled by I packet) OFF (immediate
commands not
enabled through
printer’s front
panel) ON (immediate
commands
enabled through
printer’s front
panel)