Avery Dennison 9430R Operator Handbook User Manual

Page 8

1-2 Getting Started

B a t t e r y a n d S a f e t y I n f o r m a t i o n

The printer is powered by a 6.0V Nickel Metal Hydride
(NiMH) battery.

♦

Charging time in the printer is approximately
1.5 hours.

♦

Take the battery out of the printer when storing the
printer for long periods of time.

♦

The battery storage temperature is 40

F to 104

C to 40

C). Do not store a fully charged battery

at temperatures greater than 104

F (40

C) for long

periods of time. The battery may permanently lose
charge capacity.

♦

Be sure to use a fully charged battery before long
or battery-intensive printing sessions. Certain
operations (for example, printing receipts with a lot
of bar codes and graphics or using Bluetooth) drain
the battery more quickly than others.

♦

Disposal information – Do not throw in trash.
Dispose according to your local regulations or
recycle the battery. Batteries can also be returned
postage-paid to: ERC; 200 Monarch Lane Door
#39; Miamisburg, OH 45342.

CAUTION

Do not disassemble, short circuit, heat

above 80

C, or incinerate. The

battery may explode.

♦

The recommended temperature for charging is
68

F (20

C) to 77

F (25

C).

NOTE: Optimal battery performance is achieved after

using the battery until it is completely drained
and recharged five times.