Avery Dennison Monarch 6017 Programmer Manual - Manual (Page 9)

Creating and Printing Formats 2-3
Command Description
ESC-'k'- Selects a font. Standard Bold is the default.
0 Large Rotated (90 degrees clockwise)
1 Large Normal
2 Standard Bold
3 Standard Normal
4 Reduced Bold
5 Reduced Normal
ESC-'U' - Turns bold printing on or off.
0
Turn off bold printing.
1 Turn on bold printing.
ESC-'a'-
Specifies the amount the space for the printer
to leave between lines of text.
0-10 The amount of space (in increments of
.125 mm). The default is 3 (.375 mm).
Example: ESC-a2 S ets the space between text lines to .25 mm.
C r e a t i n g G r a p h i c F i e l d s
The printer can print bitmap graphics from
♦ data streams
♦
flash memory.
You use the same commands for both methods. However, if you use a data
stream, you must recreate the graphic every time you want to prin t i t . I f y o u
put the graphic in flash memory, you create it only once, and then retrieve it
when you want to print it.