Avery Dennison Monarch 6017 Programmer Manual - Manual (Page 16)

2-10 Creating and Printing Formats
P o s i t i o n i n g F i e l d s
The following commands/control characters move the supply through the
printer to position the fields on the format. The application can also write
spaces to the printer before it prints text to position a field.
There are .157-inch no-print zones on the image area’s
right and left sides and a .7-inch no-print zone at the
top.
Command Summary
Command Description
D hex (CR) Advances to the beginning of the next line.
C hex (FF)
Advances 10 lines.
14 hex (Norm)/F hex (SI) Sets the printer to 48-column mode.
E hex (SO)
Sets the printer to 24-column mode.
B hex (VT) Advances 5 lines.
9 hex (HT) Tabs to the next position or the beginning of
the next line.
A hex (LF) Advances to the beginning of the next line.
ESC-'J' - Performs a specified number of line feeds.
1-FF The number of line feeds, specified in
hex. The default is 1 (.125 mm).