Avery Dennison Monarch 6017 Programmer Manual - Manual (Page 20)

3-4 Configuring the Printer
Command Summary
Command
Description
ESC-'M'--
-'0' -CR
Sets the power-off timer’s inactivity period.
and 0-9 The first and second digits,
respectively, of the number of seconds
to set the inactivity period to. To
disable the timer, set both parameters
to 0.
Example:
ESC-M560-CR
Sets the inactivity period to 56 seconds.
ESC-'C' Sets the inactivity period to the default (20
seconds).
Be careful when using sleep mode
with buffer mode. If there is data
in the print buffer when the printer
goes into sleep mode, you lose
the data.