Avery Dennison Monarch 9855 RFMP Quick Reference User Manual
Page 4
4
L o a d i n g R F I D L a b e l s
The RFID supplies are sensitive to static
electricity and can be damaged by static
electricity. Ground yourself by touching some
metal, such as the printer’s metal base, before
handling the supplies.
Refer to the 9855 Operator's Handbook for additional
supply loading instructions if using non-RFID supplies in
your RFID printer.
1.
Open the cover.
2.
Unlock the printhead by turning the retaining latch.
3.
Lift the printhead assembly using the printhead tab
until the assembly locks into place.
4.
Place the roll of supply on the supply holder. For
labels, the supply unrolls from the top or the bottom.
For tags, make sure the supply unrolls from the
bottom, because tag rolls are wound face in. Do not
pick up the printer by the supply holder.
P ri n t h ea d
T a b
D e f l ec t or
T a b