Avery Dennison Monarch 9416 XL Intelligent Kit - Manual (Page 15)

Setting Up the Printer 2-3
S e l e c t i n g t h e F o r m a t S e n d i n g M o d e
There are two Format Sending Modes: As Needed and Always. To send
all formats at once, select Always. To send only the correct format, select
As Needed. The default is As Needed.
1. From the Config Menu, press
 or  until you see
1. Set Format Sending Mode
2. Press Enter. You see
Select format sending mode
1=AS NEEDED, 2=Always >
The current setting is displayed in all caps.
3. Press 1 or 2 to select the mode you need. You return to the
Config Menu.
Using Batch Separators
A batch separator is an extra label printed in between batches (print jobs)
with a pinstripe pattern. Only the 9825 and 9855 printers use this option.
For non-indexed supply, the batch separator is always six inches long.
The name of the print job is shown on the batch separator.
Note: The 9416 printer does not use batch separators and ignores this
setting.
B a t c h S ep a r at o r