Avery Dennison Pathfinder 6032 Quick Start User Manual
Page 9
3. Hold the printer upright and gently press down
on the label deflector. It may be stiff.
4. Use a dry, soft-bristled
9
lack)
n
s
No
ess
brush, such as a
toothbrush, to clean
both the standard
(black) or linerless
(red/orange textured)
platen roller.
Turn the platen roller
5.
with your finger to clean
all the way around.
Reload supplies and close
P l a te n R o ll e r
6.
the label deflector and
supply cover.
If the brush does not remove all the adhesive:
Use isopropyl alcohol ONLY on the standard (b
platen roller. Moisten a cotton swab with isopropyl
alcohol and run the cotton swab across the platen
roller. Turn the platen roller with your finger to clea
all the way around. After cleaning, feed several inche
of supply through without printing to remove any
remaining isopropyl alcohol.
te: Do not use alcohol or solvents on the linerl
(red/orange textured) platen roller.
7. Call Service to clean the linerless (red/orange textured)
platen roller.
C l e a r i n g S u p p l y J a m s
1. Turn off the printer.
2. Open the supply cover completely.
3. Open the label deflector.
4. Remove the supplies.
a
5. Carefully remove any j mmed supply and close the
deflector.
Do not pull the jammed supply out through the front of
the label deflector. Do not use sharp objects to
remove jammed supplies.
Remove the extra supply between the pinch and
rollers.
6.
feed
7. Reload the supplies and close the supply cover.