Avery Dennison Pathfinder 6032 Quick Start User Manual
Page 8
![background image](https://www.manualsdir.com/files/772876/content/doc008.png)
C l e a ni ng t h e Pi nc h a n d Fe e d R o l le r s
1. Turn off the printer and open the supply cover.
2. Remove the supplies.
3. Use a dry, lint-free cloth to clean the pinch and feed
rollers. If that does not work, use a cloth dampened
slightly with distilled water.
4. Turn the rollers with your finger to clean all the way
around.
5. Reload the supplies after the printer dries and close the
supply cover.
C l e a ni ng t h e Bl ac k
M a r k S ens o r
1. Turn off the printer and
open the supply cover.
2. Remove the supplies.
3. Use a dry cotton swab to
clean the black mark
sensor.
B l a ck M ar k
S e n s or
4. Reload the supplies and
close the supply cover.
8
Wi ndow
d with distilled water to wipe the
e r Fl ex C a b l e
C l
when you see significant adhesive
Cl e a ni ng th e Sc ann e r
Use a soft cloth moistene
scanner window clean.
C l e a ni ng t h e Sc ann
1. Turn off the printer
y
and open the suppl
cover.
Inspect the scanner
Ad h e s i ve
B u i l d u p
2.
flex cable for any
adhesive buildup.
Clean the cable with
99% isopropyl
alcohol, if necessary.
Close the supply
S c a n ne r
F l e x C a bl e
3.
cover.
e a ni ng t h e Pl at en
R o l l e r
Clean the platen roller
buildup or a label is wrapped around the platen roller.
1. Turn off the printer and open the supply cover.
2. Remove the supplies.