Avery Dennison Pathfinder 6032 Quick Start - Manual (Page 2)

A t t a c h i n g t h e S a f e t y S t r a p
1. Turn the printer upside down so the top rests on a table
or other flat surface.
2. Take the thin end of the safety strap and push it
through the loop at the bottom of the printer handle
(near the battery compartment).
3. Push the thick end of the safety strap through the thin
end’s loop.
4. Pull the strap and guide the thin end’s loop over the
plastic piece in the middle of the strap.
5. Pull the strap tight.
2