Avalon Firestyles 1250 Panel Set - Manual

Panel Set, Answer, 1250 Insert
(see part #’s below)
© Travis Ind. 17601278 Page 1 of 1 Printed 9/1/09
CHECK CONDITION OF SHIPMENT
Upon receipt of this kit, check the condition of the packaging. Damage to the package should be noted on
the carrier's freight receipt. Any damage claims as a result of shipping must be handled through the shipper.
Travis Industries will provide assistance in resolving shipping claims or replacing items not included in the
package. Please report any missing items immediately.
COMPATIBILITY
• Lopi Answer • 1250 Insert
ITEMS NEEDED FOR ASSEMBLY
• 5/16” Nutdriver • Small & Large Standard Screwdriver
PACKING LIST
• Top and Side Panels • Four 10-24 Self-Threading Screws • Trim (with hardware)
• Two Leveling Bolts – for leveling the stove in the fireplace • (7) Spring Clips
PANEL SIZING and PART NUMBERS
Surround Panel Size Size (Including Trim) Black Trim #
8" 40 1/8" width by 28 1/4" height 99300285
10" 44 1/8" width by 30 1/4" height 99300286
INSTALLATION INSTRUCTIONS
1. With the insert 12” from the fireplace, install the side surround panels (see the directions below).
Attach the side surround panels
(hardware is included with the heater).
ANSWER: Use the included screws
(pre-thread the holes on the insert).
1250 INSERT: Use the included nuts
and bolts.
ANSWER ONLY:
Remove and discard the button
plugs from both sides of the insert.