Avalon Firestyles Cypress Greenfield - Manual (Page 6)

Fan, Cypress / GreenField
Installation Instructions
(sku 99000173)
Page 6 of 6 17601635 - 9/6/13 © Travis Industries, Inc.
10 Carefully route the rheostat under the firebox to a location near the control panel (route the wires under the
components to prevent wiring from contacting the hot firebox floor). Insert the spacer onto the rheostat
shaft and insert it into the hole next to the accent light rheostat (see Figure 16). Make sure the orientation-
tab on the rheostat lines up with the orientation-hole on in the control panel. Use the included press-nut to
secure the rheostat to the control panel (see Figure 17). Carefully replace the control panel, making sure
wires do not pinch, and attach with the four screws removed in step 9. Place the rheostat knob on the
rheostat.
Figure 16
Figure 17
11 Before attaching the blower assembly, verify all wiring is secure and does not contact any moving or hot
surfaces. Use wire ties, if necessary, to secure the wiring. Attach the blower assembly using the screws
removed in step 2 (see Figure 18) and return the stove to the correct configuration.
Figure 18