Avalon Firestyles Andirons - Manual (Page 2)

Andirons
(see part numbers below)
Page 2 of 5 17601412 - 11/20/12 © Travis Industries, Inc.
864 TRV, 864 HH, 36 CF A/R, and 564 SS Installation
NOTE: Install the andirons last, after the firebacks (if used) and logs are in place.
NOTE: On the 864 HH the front twigs may need to be re-positioned to the side of the andirons or on the floor
of the firebox (do not place twigs on top of the burner near the burner holes).
Insert the brackets on the
andirons over the grate.
Align the andirons so they are evenly spaced
and tighten these screws on the brackets to
clamp the andirons to the grate.
If necessary, bend the bracket so the andiron
points straight up.
NOTE: If using the ceramic firebacks, take care to
prevent damage to the ceramic fireback floor.
5/32" Allen
NOTE: Loosen these screws.
The upper clip needs to be
loose enough to fit over the
grate on the fireplace.
Attach the bracket to the andiron
with the included screw.
a
b
c
SPECIAL NOTE FOR 864TRV:
On this fireplace you need to lift up on the
burner slightly to insert the brackets onto
the grate. After installation, make sure the
burner is restored to the correct position.